In this mode you can manually setup parameters for when you will allow your Emaldo® system to charge and discharge.
This mode is the best if you are on a flat rate contract with your electricity supplier.
To activate Scheduled Mode, do this:
- Tap the Impact & Strategies card on the Device Screen.
- Tap Battery Strategies.
- Select Scheduled Mode.
- Tap
How to setup a schedule
- Start by selecting if you want to setup a schedule for weekdays (Monday through Friday) or for weekends (Saturday and Sunday) by switching between the tabs in the top of the screen.
- Now, select one hour intervals in the time table below to tell the system to either charge from the public grid, do nothing or discharge.
- Last you must set the threshold for the just selected actions to take place within.
The bar in the very bottom of the screen will give information on the color codes used to indicate the different battery stages.